DESCRIPTION
Ideal for customers who have salt generator systems. In just minutes AquaChek White titrators measure salt (sodium chloride) levels from 400 to 7,000 ppm. With appropriate salt levels, you can rest assured that your salt generator will be able to produce the correct amount of chlorine to keep water clean and free of contaminants.
For a clean and healthy pool, test the water at each end a minimum of twice a week!
HOW TO USE SALTSTRIPS?
How to use Salinity Strips
- Collect enough water in a small container to be one inch deep
- Insert lower end of strip into water.
Important: Keep top half of strip completely dry to get an accurate reading.
- Leave strip in water until test is complete (when yellow band turns dark, about 3-4 minutes).
- Obtain your salt concentration: note where top (highest point) of white peak falls on the number scale. Read top of peak to the nearest 0.2 division.
- Locate the sodium chloride concentration next to that reading in the table below.
Note: The chart below should only be used for AquaChek/Quantab test strips.