DESCRIPTION
| Pool Type |
In-Ground |
| Cleaner Type |
Suction-side |
| Connection |
Skimmer or 1.5″ Vacuum Line |
| Warranty |
1 Year |
| Hose Type |
Long-Life, 39 ft. of Feed Hose |
| Diaphragm |
Long-Life |
| Pool Surface(s) |
Tile, Vinyl, Gunite, and Fiberglass |
Delivers Efficient and Effective Cleaning Performance
The Zodiac G3 pool cleaner delivers efficient, effective cleaning performance that is compatible with low speed pumps for maximum efficiency.
The G3 quickly inhales small and medium debris while thoroughly cleaning pool floor, walls and steps. The G3 cleaner includes Long Life Hoses that are durable and scuff-resistant, suitable for all pool surfaces, along with a FlowKeeper™ Valve. This compact self-adjusting flow control valve automatically regulates water flow, ensuring peak performance even with low-speed pumps.
In just three simple steps, the G3 cleaner is ready to clean your pool. Simply attach the disc, wheel deflector, and hose, and connect to the skimmer or dedicated suction line. No tools or special plumbing required.
Features
- Long-Life Diaphragm – Superior, reliable one moving part technology. No gears, wheels or flappers for simple, silent operation and low-cost maintenance.
- 36-Fin Disc – Ensures maximum adhesion on all pool surfaces, and eliminates hang-ups on lights, drain covers and fittings.
- Wheel Deflector – Enables enhanced agility for negotiating tight corners.
- Patented Quick-Release Cassette – Provides quick and easy access to the diaphragm for simple maintenance.
FAQs
Zodiac G3 doesn’t move
1. Use Flow Gauge to verify proper flow.
2. Backwash filter and empty pump basket.
3. Check diaphragm for damage.
4. Check hose sections for leaks by lifting each section above water. A cracked hose can be detected by a hissing noise. Replace it.
Zodiac G3 flips over
1. Use Flow Gauge or Pool Pulse to ensure proper flow.
2. Using Flow Gauge as guide, increase or decrease flow on FlowKeeper valve.
3. Check swivel on cleaner, swivel should rotate freely.
4. Contact service technician
Zodiac G3 is patterning
1. Confirm proper cleaner hose length.
2. Use Flow Gauge to verify proper flow. Increase flow to
improve climbing. Reduce flow to move cleaner off the walls.
3. Direct pool return fittings down. Add a return diverter if necessary.
4. Check hose for kinks or coils. Lay hose in the sun for a few hours to straighten.
5. Verify correct hose weight positioning.
6. Move hose weight away from cleaner slightly. For deep
pools add a weight.
Zodiac G3 isn’t covering the opposite end of the pool
1. Add return diverters or divert return inlets downward. Use flow to move cleaner to opposite end.
2. Move hose weight away from cleaner head slightly. In deep pools add additional weight.
Zodiac G3 stops and starts
Check diaphragm for blockage or damage. Adjust worn diaphragm by loosening cassette swivel, gently pushing down on inner pipe & retightening cassette swivel.
Zodiac G3 stuck at steps
1. Use Flow Gauge or Pool Pulse to verify proper flow.
2. Confirm proper hose length. Shorten if necessary.
3. Use return jets to guide cleaner.
Zodiac G3 stuck under ladder
Install ladder guard (Part No. G21).
Zodiac G3 won’t climb walls
1. Using Flow Gauge as guide, increase flow to cleaner.
2. Confirm proper hose length.
3. Verify correct hose weight positioning.
Note: Climbing ability may be limited in some vinyl pools
and pools with safety ledges.
Zodiac G3 won’t leave edge or rim of pool
1. Using Flow Gauge as guide, reduce flow to the cleaner.
2. Verify correct hose weight positioning.
3. Move hose weight away from cleaner slightly.
ZODIAC G3 AUTOMATIC POOL CLEANER BROCHURE
